Tulip - RETRO KIT Tulip Series LED Retrofit

The Tulip Series LED Retrofit Kit enables the owner to realize the many benefits of solid state lighting while continuing to evoke the historical theme of many North American landmark parks, universities, and cities.  Retrofitting is easily accomplished in the field to minimize maintenance costs and down time.  

The retrofit kit offers an upgrade of previously installed Sentry Tulip Series luminaires.  A unitized top assembly and center column assembly replace existing HID systems to achieve long-lasting cost reductions along with a highly performing, lighting solution.


LED Retrofit kit attaches to luminaire assembly consisting of decorative base, fully welded integral housing, and injection-molded globe.  Base and assembly shall be high-strength ASTM 356.1 Cast Aluminum. Injection-molded globe, large dome and top cap shall create a weather tight chamber for the LED components, driver(s) and internal optics. IP66 available.

LED components and driver(s) are securely affixed to the mechanical structures. A thermal management system dissipates heat to insure compliance with ratings of the LED components and driver(s).

For SCT-RETRO KIT, top hood shall be heavy gauge spun aluminum. Decorative glowing finial shall be frosted acrylic.


Injection-molded UV stabilized polycarbonate or high impact acrylic globe. Globe finishes that are Inside Scrubbed, Inside Sand Blasted, or Textured have a subtle light diffusing effect.

Available in symmetric and asymmetric configurations to optimize performance, distribution, and visual comfort.


Meets UL 1598 for Safety. Retrofit kits shall utilize voltage sensing 120-277V driver, suitably rated for the specified LED light engine.  Retrofit kits shall be prewired and factory tested.

Surge Protection

Surge protected line-neutral, line-ground, and neutral-ground in accordance with ANSI/IEEE 62.41, Category C3.


To insure product durability, all exposed metallic surfaces shall be finished with a high performance coating consisting of high gloss Super Durable polyester powder coat paint to be applied utilizing a multistage process that includes phosphate pretreatment, electrostatic powder application, and convection curing.  Paint shall be weather, corrosion, abrasion, and UV resistant in compliance with the American Architectural Manufacturers Association’s specification AAMA 2604-05.  Color to be specified.


LED Retrofit kit mounts to luminaire assembly.  The completed luminaire with LED retrofit kit mounts to a Ø3” by 3” tall tenon. Three (3) 3/8”-16 UNC stainless steel allen head cup point set screws secure luminaire to post top tenon. All mounting hardware shall be stainless steel.