SUB-USD South West

SUD-USD South West, a 4 sided lantern ideal for lighting campuses, parks and plazas in suburbs everywhere. This distinctive luminaire adds a unique touch to any location, features a prominent hood and decorative side panels.

Features high-strength cast and fabricated aluminum structure. Incorporates vandal resistant polycarbonate panels. Borosilicate glass refractor delivers symmetrical or asymmetrical light distribution.

SUD-USD is designed to utilize a wide range of light sources, including High Intensity Discharge (HID), Compact Fluorescent, Induction and others. These light source families provide high efficiency in lumen output, service life and energy use.

Construction

All components to be of high-strength cast and fabricated aluminum. Panels are polycarbonate for vandal resistance. Fixture shall be hinged for easy relamping.

Optical

Four flat polycarbonate panels. An internal borosilicate glass refractor provides symmetrical and asymmetrical light distribution.

Available in a wide range of lamp choices and wattage ratings including High Intensity Discharge (HID), Incandescent, Induction and Compact Fluorescent.

Electrical

Meets UL 1598 for Safety. Luminaire shall have porcelain socket rated for 600V with 4kV pulse and uses a nickel-plated screw shell with spring-loaded center contact and lamp grips. Luminaires shall be prewired and factory tested. The ballast shall be a high power factor, constant wattage autotransformer type. The power factor shall be at least 90%.

Finish

To insure product durability, all exposed metallic surfaces shall be finished with a high performance coating consisting of high gloss Super Durable polyester powder coat paint to be applied utilizing a multistage process that includes phosphate pretreatment, electrostatic powder application, and convection curing. Paint shall be weather, corrosion, abrasion, and UV resistant in compliance with the American Architectural Manufacturers Association’s specification AAMA 2604-05. Color to be specified.

Mounting

Mounting tenon is 4-1/4” square by 6” high. Tenon is designed to fit internally on 5” square pole. Pole and luminaire tenon shall be field drilled to accommodate a 3/8”-16 UNC hex head bolt designed to pass completely through the pole/ luminaire tenon assembly and be secured on the opposite side with a Nyloc nut. All mounting hardware shall be stainless steel.

ProductZoom