SUB-NL-LED Suburban Night Lighter

A perennial favorite for residential, campus, and street lighting in communities everywhere. Series SUB-NL is reminiscent of the traditional four-sided lanterns that gave street lighting its beginnings in  colonial America.

Features a high-strength cast aluminum structure with polycarbonate panels. Mates tastefully with aluminum or cast iron poles.


The SUB-NL with LED provides several choices of the most current light engine technology to deliver high lumen output, exceptional light distribution, superior visual comfort, extended service life, and energy reduction.

Construction

All components including finial, hood, struts and base to be of high-strength ASTM 356.1 cast aluminum. Luminaire shall be fully welded, creating a single integral housing. Hood shall be hinged for easy access to the optical chamber.

LED components and driver(s) are securely affixed to the mechanical structures. A thermal management system dissipates heat to insure compliance with ratings of the LED components and driver.

Optical

Four flat polycarbonate panels. Inside hood painted white.

Available in symmetric and asymmetric reflector/refractor configurations to optimize performance, distribution, and visual comfort.

Electrical

Meets UL 1598 for safety. Luminaire shall utilize voltage sensing 120-277V driver, suitably rated for the specified LED light engine(s).  Luminaire shall be prewired and factory tested.

Surge Protection

Surge current rating of 20 kA using standard 8/20 µSec wave.  Protected line-neutral, line-ground, and neutral-ground in accordance with ANSI/IEEE 62.41, Category C3.

Finish

To insure product durability, the luminaire shall be finished with a high performance coating consisting of high gloss Super Durable polyester powder coat paint to be applied utilizing a multistage process that includes phosphate pretreatment, electrostatic powder application, and convection curing.  Paint shall be weather, corrosion, abrasion, and UV resistant in compliance with the American Architectural Manufacturers Association’s specification AAMA 2604-05.  Color to be specified.

Mounting

Mounts to a Ø3” by 3” tall tenon. Three (3) 3/8”-16 UNC stainless steel allen head cup point set screws secure luminaire to post top tenon. All mounting hardware shall be stainless steel.

ProductZoom