Steel - Round Tapered (Roadway)

Construction

The lighting pole shall be formed from up to 3 Gauge (0.2391")ASTM A595 steel.

One (1) hand hole in base of the shaft (6" x 4 1/2" minimum opening) shall be secured with stainless steel hardware.  A grounding lug provision shall be provided inside the pole.

Luminaire Mounting

A Ø3” by 3” tall tenon shall be an integral part of the pole provided for post top mounting of the luminaire. Or, various arm options can be used to side mount or pendant mount luminaires. (See "Arm Options" tab above.)

Installation

The lighting pole shall be provided with (4) ”L-Type” anchor bolts. For base size, bolt circle, anchor bolt minimum diameter, length and projection details, see "Installation Details" section.  Each anchor bolt shall be supplied assembled with (2) nuts, (2) flat washers and (1) split lock washer. All anchorage hardware shall be fully galvanized.

Finish

For mounting heights up to 16 feet, the pole shall be finished with a high performance coating consisting of high gloss Super Durable polyester powder coat paint to be applied utilizing a multistage process that includes phosphate pretreatment, electrostatic powder application, and convection curing.  Paint shall be weather, corrosion, abrasion, and UV resistant in compliance with the American Architectural Manufacturers Association’s specification AAMA 2604-05.  Color to be specified.

For mounting heights greater than 16 feet, consult factory.

ProductZoom