SPW-1 Wall Pack

The SPW-1 is smaller scale wall pack that can be used for wattages up to 100w HPS.  Its hinged, gasketed polycarbonate lens is attached to a die cast aluminum housing.  SPW-1 is ideally suited for loading docks, driveways, walkways, doorways, and other similar sites.

Construction

Aluminum die cast construction. Polycarbonate lens, hinged to allow maintenance. Weather-tight seal between housing and lens.

Optical

Available in a wide range of lamp choices and wattage ratings, including high intensity discharge (HID) and incandescent.

Specular internal reflector and prismatic lens provide illumination in a highly efficient "down-out" distribution.

Electrical

Meets UL 1598 for Safety. Luminaire shall have porcelain socket rated for 600V with 4kV pulse and uses a nickel-plated screw shell with spring-loaded center contact and lamp grips. Luminaires shall be prewired and factory tested. The ballast shall be a high power factor, constant wattage autotransformer type. The power factor shall be at least 90%.

Finish

To insure product durability, all exposed metallic surfaces shall be finished with a high performance powder coat paint to be applied utilizing a multistage process to insure resistance to weathering, corrosion, abrasion, and UV. Color to be Architectural Bronze.

Mounting

Four tapped holes and enclosure plugs for conduit, or, photocontrol (1/2” NPS). Mounting may also be accomplished using lag bolts through backside of wall pack (lag bolts not included).

ProductZoom