SLH-LED RETRO KIT Hamlet LED Retrofit

The Hamlet LED Retrofit Kit enables the owner to realize the many benefits of solid state lighting while providing a delightful variation on the square lantern style, which matches graciously with a variety of posts and architectural environments.  Retrofitting is easily accomplished in the field to minimize maintenance costs and down time.

The retrofit kit offers an upgrade of previously installed Hamlet and Oysterbay luminaires.  A frosted globe and unitized, prewired assembly replaces existing HID systems to achieve long-lasting cost reductions along with a highly performing lighting solution.

Construction

LED Retrofit kit is a unitized assembly that is afixed to the luminaire's housing.  All components, including base and finial, to be of high-strength die cast aluminum. Luminaire shall be fully welded creating one integral housing. Molded acrylic refractive globe. Die cast aluminum hood shall be hinged to allow for easy access to the optical chamber.

LED components and driver(s) are securely affixed to the mechanical structures. A thermal management system dissipates heat to insure compliance with ratings of the LED components and driver(s).

Optical

Molded acrylic frosted refractive globe. Available in symmetrical and asymmetrical light distributions to optimize performance, distribution, and visual comfort.

Electrical

Meets UL 1598 for Safety. Retrofit kit shall utilize voltage sensing 120-277V driver, suitably rated for the specified LED light engine.  Retrofit kit shall be prewired and factory tested.

Surge Protection

Surge current rating of 20 kA using standard 8/20 µSec wave.  Protected line-neutral, line-ground, and neutral-ground in accordance with ANSI/IEEE 62.41, Category C3.

Finish

To insure product durability, the luminaire shall be finished with a high performance coating consisting of high gloss Super Durable polyester powder coat paint to be applied utilizing a multistage process that includes phosphate pretreatment, electrostatic powder application, and convection curing.  Paint shall be weather, corrosion, abrasion, and UV resistant in compliance with the American Architectural Manufacturers Association’s specification AAMA 2604-05.  Color to be specified.

Mounting

LED Retrofit kit mounts to luminaire assembly.  The completed luminaire with LED retrofit kit mounts to a Ø3” by 2 1/2” tall tenon. Three (3) 3/8”-16 UNC stainless steel allen head cup point set screws secure luminaire to post top tenon. All mounting hardware shall be stainless steel.

ProductZoom