SGO Olympian

This handsome high-output luminaire proclaims the distinctive classic contours of the luminous torch. In both performance and appearance Series SGO excels. Its borosilicate glass prismatic globe is impervious to ultra-violet (UV) rays and therefore, retains its original light transmission capacity, never turning yellow, or, opaque. Its patterns of deeply molded refracting prisms deliver high output lumens with a subtle pleasing sparkle. Because this type of glass is tempered and very hard, it works well with currently available high wattage HID lamps.

Being made of high-strength cast aluminum, the base of the luminaire is resistant to damage from vandalism, time and weather. Mates tastefully with a variety of posts, period and contemporary.

SGO is designed to utilize a wide range of light sources, including LED, High Intensity Discharge (HID), and others. These light source families provide high efficiency in lumen output, service life and energy use.


Decorative base to be of high-strength ASTM 356.1 cast aluminum. Globe shall be borosilicate glass with molded in prisms.


Borosilicate glass prismatic globe creates symmetrical and asymmetrical light distribution.

Available in a wide range of lamp choices and wattage ratings including High Intensity Discharge (HID) and Incandescent.


Meets UL 1598 for Safety. Luminaire shall have porcelain socket rated for 600V with 4kV pulse and uses a nickel-plated screw shell with spring-loaded center contact and lamp grips. Luminaires shall be prewired and factory tested. The ballast shall be a high power factor, constant wattage autotransformer type. The power factor shall be at least 90%.


To insure product durability, all exposed metallic surfaces shall be finished with a high performance coating consisting of high gloss Super Durable polyester powder coat paint to be applied utilizing a multistage process that includes phosphate pretreatment, electrostatic powder application, and convection curing. Paint shall be weather, corrosion, abrasion, and UV resistant in compliance with the American Architectural Manufacturers Association’s specification AAMA 2604-05. Color to be specified.


Mounts to a 3” diameter by 3” tall tenon. Three (3) 3/8”-16 UNC stainless steel allen head cup point set screws secure luminaire to post top tenon. All mounting hardware shall be stainless steel.