SGCP Partnership

From the east side to the west, mid-town Manhattan streets are well illuminated and defined by this contemporary favorite. The sleek and highly efficient luminaire is designed with both a glass refractor and an aluminum reflector to produce either symmetrical, or, asymmetrical distribution. Available with a vertical or horizontal burning lamp. Structure of high-strength cast aluminum, aluminum spinnings and polycarbonate globe.

SGCP is designed to utilize a wide range of light sources, including LED High Intensity Discharge (HID), Induction and others. These light source families provide high efficiency in lumen output, service life and energy use.

Construction

Decorative top fitter shall be heavy wall high-strength ASTM 356.1 cast aluminum. Top fitter shall be cast as one integral piece. Luminaire dome shall be heavy gauge spun aluminum. Bullet globe shall be polycarbonate. Hinged globe held in place by (2) solid catches with thumb-triggered secondary locks allowing easy access for relamping and fixture maintenance.

Optical

Lamp mounted inside a borosilicate glass refractor with aluminum reflector.

Vertical burning lamp shall produce a symmetrical (Type V) and asymmetrical (Type III) light distribution.

Horizontal burning lamp shall produce an asymmetrical (Type III) light distribution only.

Available in a wide range of lamp choices and wattage ratings including High Intensity Discharge (HID), Incandescent and Induction.

Electrical

Meets UL 1598 for Safety. Luminaire shall have porcelain socket rated for 600V with 4kV pulse and uses a nickel-plated screw shell with spring-loaded center contact and lamp grips. Luminaires shall be prewired and factory tested. The ballast shall be a high power factor, constant wattage autotransformer type. The power factor shall be at least 90%.

Finish

To insure product durability, all exposed metallic surfaces shall be finished with a high performance coating consisting of high gloss Super Durable polyester powder coat paint to be applied utilizing a multistage process that includes phosphate pretreatment, electrostatic powder application, and convection curing. Paint shall be weather, corrosion, abrasion, and UV resistant in compliance with the American Architectural Manufacturers Association’s specification AAMA 2604-05. Color to be specified.

Mounting

Mounts to a 3” OD side arm. The 4” deep slip fitter is provided with two (2) 3/8”-16 UNC stainless steel allen head cup point set screws. Optional mounting for a 2” OD side arm available.

ProductZoom