SCS-WL Cast Iron and Steel Pole

Construction

The lighting pole shall be from cast iron and steel construction. Shafts shall be 11 Gauge steel. Base shall be from thick walled ASTM A48, Class 30, cast iron.

One (1) access door in the base (4 1/2” x 5 1/2” minimum opening) shall be secured with stainless steel hardware. A 3/8”-16 UNC grounding lug provision shall be provided inside the base of the pole.

Luminaire Mounting

A Ø3” by 3” tall tenon shall be an integral part of the pole provided for post top mounting of the luminaire.

Installation

The lighting pole shall be provided with (4) Ø3/4” x 24” long ”L-Type” anchor bolts. Each anchor bolt shall be supplied assembled with (2) nuts, (2) flat washers and (1) split lock washer. The pole shall have a Ø12” bolt circle and requires a 3” anchor bolt projection. All anchorage hardware shall be fully galvanized.

Finish

The pole shall be finished with a high performance coating achieved with a three step paint process.  An acid etching industrial wash primer, two part epoxy base primer, and a finish coat that is a two-part aliphatic acrylic polyurethane.  Paint shall be weather, corrosion, abrasion, and UV resistant in compliance with the Society for Protective Coatings SSPC-36 (level 3) paint standard. Color to be specified.

ProductZoom