SBN Binghamton

Designed specifically for the upstate New York city whose name it bears. This classically styled luminaire incorporates a tulip contour, decorative bas-relief ornamentation around it's dome and a prominent finial. Provides a highly styled, elegant and decorative touch to any streetscape, park or plaza. The subtle ornamentation and classic styling evoke the feel of a bygone era.

High-strength cast aluminum structure and polycarbonate or acrylic globe. Several decorative bases are available for appropriate mating with a variety of ornamental posts.

SBN is designed to utilize a wide range of light sources, including LED, High Intensity Discharge (HID), and others. These light source families provide high efficiency in lumen output, service life and energy use.


All components and decorative base shall be high-strength ASTM 356.1 cast aluminum. Luminaire shall be fully welded creating one integral housing.  Injection-molded polycarbonate globe, large dome and top cap shall create a weather tight chamber for the ballast assembly and internal optics. Top shall be hinged to allow for easy relamping.


Injection-molded UV stabilized polycarbonate or high impact acrylic globe.  Standard globe finish (Inside Scrubbed) creates a subtle light diffusing effect.

Available in a wide range of lamp choices and wattage ratings, including High Intensity Discharge (HID) and Incandescent.  Synchronized reflector system optimizes light output utilizing upper and lower Alzak® reflectors.

Standard optical system, Inside Scrubbed Globe.  Additional optical systems include Glare Reduction Louver System, Borosilicate Glass Refractor, Horizontal, Horizontal Semi-Cutoff, Horizontal Full Cutoff and Virtual Light Source.


Meets UL 1598 for Safety. Luminaire shall have porcelain socket rated for 600V with 4kV pulse and uses a nickel-plated screw shell with spring-loaded center contact and lamp grips. Luminaires shall be prewired and factory tested. The ballast shall be a high power factor, constant wattage, autotransformer type. The power factor shall be at least 90%.


To insure product durability, all exposed metallic surfaces shall be finished with a high performance coating consisting of high gloss Super Durable polyester powder coat paint to be applied utilizing a multistage process that includes phosphate pretreatment, electrostatic powder application, and convection curing.  Paint shall be weather, corrosion, abrasion, and UV resistant in compliance with the American Architectural Manufacturers Association’s specification AAMA 2604-05.  Color to be specified.


Mounts to a Ø3” by 3” tall tenon.  Three (3) 3/8”-16 UNC stainless steel allen head cup point set screws secure luminaire to post top tenon.  All mounting hardware shall be stainless steel.