SAL-MC-CO Clamp On Base


The decorative clamp-on base shall be made from cast ASTM 356.1 aluminum construction. A continuous cast ring shall conform to shaft configuration and overlay the (2) halves of the clamp-on base. Thus, creating a continuous, smooth transition from the base to the shaft and mechanically locks both halves of the clamp-on base together.

One (1) hand hole in the pole (3” x  2 1/2” minimum opening)

Accepts poles up to max. Ø5 1/4”. Adapters required based on shaft options.

Luminaire Mounting

A Ø3” by 3” tall tenon shall be an integral part of the pole provided for post top mounting of the luminaire.


The clamp-on base shall be held together with (4) stainless steel flat allen head screws. The lighting pole shall be provided with (4) Ø3/4” x 24” long ”L-Type” anchor bolts. Each anchor bolt shall be supplied assembled with (2) nuts, (2) flat washers and (1) split lock washer. The pole shall have a Ø7” bolt circle and requires a 3” anchor bolt projection. All anchorage hardware shall be fully galvanized.


To insure product durability, the base and pole shall be finished with a high performance coating consisting of high gloss Super Durable polyester powder coat paint to be applied utilizing a multistage process that includes phosphate pretreatment, electrostatic powder application, and convection curing. Paint shall be weather, corrosion, abrasion, and UV resistant in compliance with the American Architectural Manufacturers Association's specification AAMA 2604-05. Color to be specified.