The decorative clamp-on base shall be made from cast ASTM 356.1 aluminum construction. One (1) access door in the base (11” x 15 1/2” minimum opening) shall be secured with stainless steel hardware. Accepts poles up to max. Ø15”. For poles Ø14” - Ø15”, no adapters required. Poles less than Ø14”, adapters are used between clamp-on base and pole.
The lighting pole shall be formed from 11 Gauge (0.1196”) up to 3 Gauge (0.252”) ASTM A595 steel. One (1) hand hole in the base of the shaft (6” x 4 1/2” minimum opening ) shall be secured with stainless steel hardware. A grounding lug shall be provided inside the pole adjacent to the access door.
The base shall be held together with (4) stainless steel flat allen head screws. The lighting pole shall be provided with (4) ”L-Type” anchor bolts. Consult factory for base size and anchor bolt minimum Ø, length, projection and bolt circle details. Each anchor bolt shall be supplied assembled with (2) nuts, (2) flat washers and (1) split lock washer. All anchorage hardware shall be fully galvanized.
To insure product durability, the base and pole shall be finished with a high performance coating consisting of high gloss Super Durable polyester powder coat paint to be applied utilizing a multistage process that includes phosphate pretreatment, electrostatic powder application, and convection curing. Paint shall be weather, corrosion, abrasion, and UV resistant in compliance with the American Architectural Manufacturers Association's specification AAMA 2604-05. Color to be specified.