SAL-CCL-SO Slide Over Base

Construction

The slide-over base shall be made from cast ASTM 356.1 aluminum construction. The pole shall be made from 3 1/2” Schedule 40 steel pipe (Ø4” OD) or 5” schedule 40 steel pipe (Ø5 9/16” OD).

One (1) access door in the base (14” x 5” minimum opening) shall be secured with stainless steel hardware.

One (1) hand hole in the pole (3” x 2 1/2” minimum opening) shall be secured with stainless steel hardware.

Accepts poles up to max. Ø5 5/8”.

Luminaire Mounting

A Ø3” by 3” tall tenon shall be an integral part of the pole provided for post top mounting of the luminaire.

Installation

Base to be slid over pole. The lighting pole shall be provided with (4) Ø3/4” x 24” long ”L-Type” anchor bolts. Each anchor bolt shall be supplied assembled with (2) nuts, (2) flat washers and (1) split lock washer. The pole shall have a Ø10” bolt circle with a 5” max. anchor bolt projection. All anchorage hardware shall be fully galvanized.

Finish

To insure product durability, the base and pole shall be finished with a high performance coating consisting of high gloss Super Durable polyester powder coat paint to be applied utilizing a multistage process that includes phosphate pretreatment, electrostatic powder application, and convection curing. Paint shall be weather, corrosion, abrasion, and UV resistant in compliance with the American Architectural Manufacturers Association's specification AAMA 2604-05. Color to be specified.

ProductZoom