SAL-BOP-SO Slide Over Base


The slide-over base and mid-section shall be made from cast ASTM 356.1 aluminum construction. The pole shall be made from 3 1/2” Schedule 40 aluminum pipe (Ø4” OD) or 5” aluminum tube (Ø5” OD).

One (1) access door in the base (9” x 6” minimum opening) shall be secured with stainless steel hardware.

One (1) hand hole in the pole (3” x 2 1/2” minimum opening) shall be secured with stainless steel hardware.

Accepts Ø4” and Ø5” poles.

Luminaire Mounting

A Ø3” by 3” tall tenon shall be an integral part of the pole provided for post top mounting of the luminaire.


Base to be slid over pole, mid-section then secured to slide-over base using (3) stainless steel set screws. Removable mid-section incorporates groove locking feature. The lighting pole shall be provided with (4) Ø3/4” x 24” long ”L-Type” anchor bolts. Each anchor bolt shall be supplied assembled with (2) nuts, (2) flat washers and (1) split lock washer. The pole shall have a Ø11” bolt circle and requires a 3” anchor bolt projection. All anchorage hardware shall be fully galvanized.


To insure product durability, the base and pole shall be finished with a high performance coating consisting of high gloss Super Durable polyester powder coat paint to be applied utilizing a multistage process that includes phosphate pretreatment, electrostatic powder application, and convection curing. Paint shall be weather, corrosion, abrasion, and UV resistant in compliance with the American Architectural Manufacturers Association's specification AAMA 2604-05. Color to be specified.